CCS晰写速

日本CCS晰写速 PD2-3012-8(A) 数字电源

产品详细信息外观尺寸W 110 mm x D 170 mm x H 122 mm适合光源(输出定额)12 V/25 W通道数8 channels发光方式常时发光驱动方式Constant-voltage system调光方式PWM control调光Use of the intensity control knobs on the front panel (Coarse and Fine, 16 s

产品详细信息

外观尺寸W 110 mm x D 170 mm x H 122 mm
适合光源(输出定额)12 V/25 W
通道数8 channels
发光方式常时发光
驱动方式Constant-voltage system
调光方式PWM control
调光Use of the intensity control knobs on the front panel (Coarse and Fine, 16 steps for each knob)
PWN频率62.5 kHz
输入电压100 to 240 VAC
频率50/60 Hz
消耗功率78 VA typ.
输出电压12 VDC
输出电流2.1 A (total for 8 channels)
涌入电流(typ)15 A (at 100 VAC) *From a cold start
错误检测显示The Error indicator lamp on the front panel is lit when overcurrent is detected
错误检测输出External control connector 12 pin (OCP): Open in normal condition, Open-collector ON when an overcurrent is detected.
过电流保护Yes
外部控制输入Insulation: Not insulated with a Control Unit
Circuit: Pull-up of +5 V internally by use of resistor (2.2 kΩ), HS-CMOS input
输出端口SMP-02V-BC (1: Output(+), 2: Output (-)) x 8
外部控制端口External control: 25-pin D-sub plug with M2.6 mm screws
适合规格CE, UKCA、RoHS
使用温湿度Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
保存温湿度Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
冷却方式Natural air cooling
重量1,500 g max.
材质Steel plate t1.0
附属品2m long 3-prong AC power cord with ground terminal, Instruction Guide, Optional Cable Operation Guide
注意事项The light connector is 2-pin.


首页
产品
新闻
联系